I. 10/ 100M COMMON CONVERTER
General Description
This Optical Fiber Converter is a kind of quick Ethernet Media Converter with the function of photo electricity switch over between 1OBASE-TX or 1OOBASE-TX and 1OOBASE-FX. It can extend the conventional 1OM Ether net or 1QOM Quick Ethernet to 120KM via the quick Ethernet Fiber-optical Line. The stable and reliable switch power supply module enables long-term operation and makes it convenient to replace the power supply. Full-duplex and half-duplex optional. The configuration of DTE and MPR functions makes it convenient to connect the similar products.
Features
Inner power or external power optional Media converter module could be used with rack mount
Power supply AC 220V or DC 48V Dual fiber module or single fiber module optional
Auto identify MDI/MDIX
Full/half duplex and transmit velocity can be adjusted
Extend fiber-optic distance up to 120km with single-mode fiber
TECHNICAL DATE
SPECIFICATIONS
Standard | IEEE 802.3 10BaseT,IEEE 802.3u 100Base-FX |
Work Mode | full-duplex, half-duplex, and full/half duplex auto-negotiation |
Transmit distance | MM:2-5Km/SM:20-80Km |
Receive sensitivity | <-30dBm |
Power supply | AC:165-260V50Hz, DC:.75~.36V |
Operating temperature | 0°C~+50°C |
Storage temperature | 0°C~+50°C |
Humidity | 5%~90% |
Geenral Description
Both fiber port and TP port of 1OOOM Ethernet Media Converter Series are compliant with IEEE 802.3 and IEEEE802.3ab. With working rate up to 1000mb/s and transmission distance in single fiber up to 80KM, 1000M Media Converter is appropriate for the transmission of city backbone net work. It is mainly used to link Ethernet equipment. It extends the transmission distance of network through its own fiber and electricity transmitting. In the meantime, the bandwidth of network can be up to 1000M. All the 1000M-net work equipment such as media converters and Router can be intercommunicated with it. And it supports the accession in communities, office buildings and enter prises.
Features
Support 100Base-FX/SX, working with other equipments at all Support 10/100M, 1000M, Full/Half duplex auto-negotiation Comply with IEEE 802.1Q or ISL 10/100/1000Mbps equipments are available for 1000Mbps Cross wire and beeline are supported by port Power supply can be AC 220V or DC 48V
– Dimension:150mmx115mmx33mm * Input voltage: 220VAC or 48VDC * Power wastage: 5W
– Weight:0.85Kg
– Operating temperature:0°C-60°C
– Storage temperature:-10°C-70°C
– Humidity:5%~95%(no-condensing) Protocol
– IEEE802.3 Ethernet(1OMbps)
– IEEE802.1d Building tree protocol
– IEEE802.3u Quick ethernet (1OOMbps) * IEEE802.1Q VLAN
– IEEE802.1p QOS PRI
– IEEE802.3x Full duplex flux control
– CISCO ISL & VTP protocol